Rocket Mass Heaters Superefficient Woodstoves You Can Build Pdf Free
This work session spawned the Second Edition, with a new name, Rocket Mass Heaters, Superefficient Woodstoves YOU Can Build (and snuggle up to), with a real spine and cover, and printed by a midwest printing company called United Graphics, LLC. It also spawned the first online forum on rocket mass heaters by Kirk which both he and Ernie (and now, a handful of truly passionate and creative stove builders) have been moderating for these 8 years.
rocket mass heaters superefficient woodstoves you can build pdf free
Rocket mass heaters are a space heating system expanded from the rocket stove, which is considered one of the most efficient wood-burning technologies. The rocket mass heater offers much higher efficiency ratings and claims to be able to heat your home with 80 to 90 percent less wood fuel. This is due to the rocket mass heater design as it allows hotter and more efficient combustion of wood fuel while also allowing for the heat produced to be slowly released.
Rocket mass heaters include an insulated combustion chamber where wood can be burned at extremely high temperatures to maintain maximum heating efficiency. Whereas most of the heat in a traditional fireplace or wood stove escapes out of the chimney, the rocket mass heaters' thermal mass absorbs the heat. It then slowly releases the heat over time into the surrounding area.
Rocket mass heaters can reduce the amount of greenhouse gas emitted into the atmosphere. One of the main environmental problems associated with heating your home with wood is methane and nitrous oxide emissions. The National Association of Home Builders found 99 percent of residential methane emissions come from "inefficient combustion of wood in fireplaces and woodstoves." Of course, methane is one of the most potent greenhouse gasses. By focusing on efficient combustion technology, the rocket mass heater helps minimize the release of these gasses.
Like a traditional wood stove, a rocket mass heater requires cleaning as ash builds up over time and use. Ash build-up occurs in the feed tube (also known as the fuel magazine), where the wood is inserted for burning. The cleaning schedule is dependent on usage, but it's recommended to clean the feed tube bi-weekly to ensure maximum efficiency. Depending on the amount of access you have, the feed tube can be cleaned with a small shovel, a container, or the hose of a vacuum. If you plan to use a vacuum, it's important to use one with a filter to prevent the ash from spreading throughout the area. Cleaning should only occur when the rocket mass heater is completely cooled.
While rocket mass heaters are technically legal in most places, always review local, state, and federal laws before installing a rocket mass heater. Contact your local building officials to obtain a permit and information on any installation restrictions and inspection requirements in your area. Before installing a rocket mass heater in your home, contact your insurance company to understand what conditions or requirements they may have.
Yes, when they have been tested and certified. Manufacturers offer certified rocket mass heaters that meet listing and labeling standards. While labeling may differ between the United States and Canada, look for rocket mass heaters that possess product safety and performance marks from UL, ULC, or Warnock Hersey. These rocket mass heaters have been laboratory tested and meet government safety guidelines in their applicable regions.
Rocket mass heaters should only be installed and operated following the manufacturer's instructions. Contact local building and fire officials about restrictions, installation, and inspections required in your area. Rocket mass heaters should not be connected to a chimney flue serving another appliance. Local building codes may specify alternative requirements, including installation and location considerations.
Only natural wood, cordwood, twigs, and branches should be burned in rocket mass heaters. Never use artificial logs, flammable liquids, petroleum products, coal, propane, plastic, foam, or other gas-based fuels.
What constraints are you already working with? (i.e., difficult/rocky soils will rule out an underground heat-exchanger.) Think about how much floor space in the greenhouse you have for things like water barrels. And most importantly think about the time and labor involved in installing each system, as well as the on-going time/labor that it can take to run each system (i.e., an underground heat exchanger can be automated, whereas a rocket mass heater cannot be). Again, while you need to do some homework upfront, having a warm greenhouse churning out fresh food throughout the winter (and free!) is the best payoff you can get.